CHM-SGT1700H Paper Roll to Sheet with Non-Stop Feeding, Splicing and Pallet Change,Increase your production Line.
In a busy paper converting plant, stopping the Paper Sheeter Machine is sometimes unavoidable.
A paper roll comes to the end.
A new roll needs to be loaded.
The sheets keep coming until the pallet is full.
Then the pallet has to be changed.
None of these jobs are complicated, but every stop takes time.
When a High Precision Twin Knife Sheeter is running for long production hours, these small interruptions can become a real part of the production cost.
That is why the CHM-SGT1700H can be equipped with a set of Non-Stop Sheeting solutions, including Non-Stop Roll Feeding, Automatic Splicing, Non-Stop Sheet Delivery and Non-Stop Pallet Change.
The idea is simple: keep the paper moving for as long as possible.
Less Stopping at the Roll Stand
One of the most noticeable interruptions in roll-to-sheet production happens when a paper roll runs out.
With a conventional Roll to Sheet Cutting Machine, the operator normally needs to stop the line, remove the finished roll and load a new one before production can start again.
For a high-speed Paper Sheeter, this is wasted running time.
The Non-Stop Roll Feeding System allows the next roll to be prepared while the current roll is still running.
When the roll is approaching its end, the new roll can be brought into position and the Automatic Splicing System completes the transition between the two rolls.
The machine does not need to wait for the old roll to be completely removed before preparing for the next production cycle.
For customers running long orders, this is a practical way to reduce interruptions caused by roll changes.
The Cutting Section Is Only Part of the Story
A Paper Sheeter Machine can cut paper accurately at high speed, but production does not finish at the knife.
After cutting, the sheets have to be delivered, aligned and stacked.
If the pallet becomes full and the operator has to stop the Sheet Delivery System, the cutting section has to stop with it.
This is where Non-Stop Sheet Delivery becomes important.
The finished sheets continue through the delivery section while the pallet change is handled separately.
The purpose is not simply to make the machine faster.
It is to avoid making the delivery section a reason for stopping the entire Paper Sheeting Machine.
Changing the Pallet Without Stopping Production
The same principle applies to Non-Stop Pallet Change.
Once a pallet is full, the finished stack needs to leave and a new pallet needs to take its place.
With a conventional setup, this can mean stopping production and waiting for the pallet change.
With the Non-Stop Pallet Change System, the changeover is handled while the sheeting process continues.
For a factory producing thousands of sheets over a long shift, this can make the production rhythm much more consistent.
The operator does not have to treat every full pallet as a production stop.
Built Around Continuous Production
The CHM-SGT1700H High Precision Twin Knife Sheeter is designed for high-precision paper sheeting. With the additional non-stop systems, the focus moves beyond the cutting process itself.
The complete production flow can include:
Non-Stop Roll Feeding
→ Automatic Splicing
→ High Precision Sheeting
→ Non-Stop Sheet Delivery
→ Non-Stop Pallet Change
This is particularly useful for customers who run long production shifts and want to make better use of the available machine time.
It also changes the way operators work.
Instead of constantly waiting for a roll change or pallet change, they can prepare the next material, monitor the running paper and pay attention to quality while the machine continues producing.
That is often where the value of automation becomes clear — not in adding another function to the machine, but in removing small interruptions from everyday production.
A More Practical Approach to Paper Sheeting
There is no single configuration that is right for every paper mill or converting plant.
The right Paper Sheeter Machine depends on the paper grade, GSM, roll dimensions, sheet size, production speed and daily output.
For customers looking for a High Speed Paper Sheeter with less downtime during roll changes and pallet changes, the CHM-SGT1700H with Non-Stop Roll Feeding, Automatic Splicing, Non-Stop Sheet Delivery and Non-Stop Pallet Change provides a more continuous production setup.
The goal is straightforward:
Cut more. Stop less. Keep the line running.
If you are looking for a CHM-SGT1700H Paper Sheeter Machine or planning a high-speed roll-to-sheet production line, send us your paper GSM, roll size, sheet size and target production speed. CHM will recommend the suitable sheeting and non-stop configuration for your production needs.
